Farmer 400
Fav 700
Fav 900
Power lift / Electrohydraulic control EPC
Operation and control conditions of EPC-C
A
General
Fav 900 chassis number 23/3001 and up
11.04.2001
8610
000003
A
a
5/5
Capitel
Docu-No.
Index
Date
Version
Page
Operation and control conditions of EPC-C
Text-module
Actuation by means of auxiliary control unit (EPC-DA switchover)
If the three-way valve AV3 / AV4 is switched, the EPC ECU A005 and the EPC-C control valve are
disabled.
The rear power lift is operated via the auxiliary control unit 1.2 ("blue") in DA mode.
The rear power lift can be used to press (no control action).
PM-Picturemodule
PM-Picturemodule
Text-module
Note:
Rear power lift operation, see also tractor operating manual
PMTAB_Picture
Danger:
Lower all mounted implements at
front and rear!
Before switching to DA mode,
disconnect implements from auxiliary
control unit 1.2 blue at rear
connection and multi-coupling.
Unintended movements of the
implements, front loader and rear
power lift could otherwise occur.
The tractor must be propped if the
power lift is used for repair purposes
(pressing mode ) e.g. for changing a
tyre!
Switching from EPC to DA
●
Lower lift assembly (with implemented
mounted).
●
Switch crossgate lever to floating position .
●
Switch lever to DA position (forwards)
Switching back from DA to EPC
●
Lower lift assembly completely.
●
Switch crossgate lever to floating position .
●
Switch lever to EPC position (backwards).
●
Unlock EPC (operate rapid lift control).
PMTAB_Picture
Operating power lift in DA mode (auxiliary
control unit 1.2 "blue" )
A
= Raise
B
= Lower or Press
C
= Floating position
Note:
Ground-following implements may only be
operated in floating position.
