![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870249.webp)
Fav 900
Transmission / Axle drives
Disassembly and reassembly of axle drives
G
Repair
17.09.2001
1015
000003
G
a
5/9
Capitel
Docu-No.
Index
Date
Version
Page
Disassembly and reassembly of axle drives
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Attach mounting handles (DIY, see photo) to
rear-axle shaft (31).
Knock rear-axle shaft (31) onto metal block.
PMTAB_Picture
Withdraw inner race of taper roller bearing (28)
using bearing separator X 899.980.159.
Then force shaft seal (30) off.
PMTAB_Picture
Assembly
Where removed:
Press outer race of taper roller bearing (28) in as
far as stop.
Clip snap ring (29) into groove.
On other side press in outer race of taper roller
bearing as far as stop.
PMTAB_Picture
Heat inner race of taper roller bearing (28) to
approx. 80
°
C and insert into axle housing (15).
Coat new shaft seal (30) on outside with sealant
X 903.051.711 and on inside with alcohol/water
mixture (1:1) and then insert until stop is reached.