![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870248.webp)
Fav 900
Transmission / Axle drives
Disassembly and reassembly of axle drives
G
Repair
17.09.2001
1015
000003
G
a
4/9
Capitel
Docu-No.
Index
Date
Version
Page
Disassembly and reassembly of axle drives
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Locate one or two adjusting washers, order no.
X 534.739.501 (each 1.0 mm thick) on rear-axle
shaft (31). Then refit planet carrier.
Note:
If no adjusting washer is available, rear-axle
shaft bearing can also be pretensioned using
clamping bush (DIY).
PMTAB_Picture
Pretension rear-axle shaft bearing using hexagon
screw (10).
Remove planet carrier (14) again.
Do not turn rear-axle shaft (31)!
PMTAB_Picture
Press split ring (25) out of groove in rear-axle
shaft (31).
Remove adjusting washers.
Withdraw dowel pin (12).
PMTAB_Picture
Fit protective cap X 899.980.157 on rear-axle
shaft.