![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870821.webp)
Farmer 400
Fav 700
Fav 900
Power lift / Electrohydraulic control EPC
Faults in slip control (radar A011)
B
Faults
Fav 900 chassis number 23/3001 and up
09.05.01
8610
000004
B
a
1/1
Capitel
Docu-No.
Index
Date
Version
Page
Faults in slip control (radar A011)
Text-module
Note:
The radar sensor A011 is not monitored, i.e. there is no fault code display on the instrument
panel A007.
PM-Picturemodule
Text-module
Text-module
Note:
See also:
Chapter 8610 Reg. A - EPC-C rear power lift
Chapter 8610 Reg. A - Operation and function of electronic slip control
Chapter 9000 Reg. E - A005 - EPC ECU
Chapter 8610 Reg. E - Slip control performance test
Chapter 9000 Reg. E - A011 - radar sensor
Slip control troubleshooting table
Fault
Cause
Remedy
Slip control switches off by itself
Not a fault: automatic shutdown
after tractor is stationary for more
than 30 sec
Activating slip control, Chapter
8610 Reg.A
Displayed speed is incorrect
Tractor's longitudinal tilt has
changed following tyre change. In
other words, nominal mounting
angle of radar sensor A011 has
changed.
Calibrating radar sensor A011;
Chapter 8610 Reg.A
Configuration of radar sensor
A01, i.e. mounting angle has
changed.
Check attachment, calibrate ra-
dar sensor A011.
Scanning area is too smooth / too
even (e.g. water)
PMTAB_Picture
Photo shows Fav 700.
A011 = Radar sensor
Technical specifications and settings for radar sensor A011
Mounting angle
53 degrees to road surface
Necessary for correct reflection
Transmission angle
15 degrees
There must not be any other com-
ponents within this transmission
angle
+ supply
12 VDC to 14 VDC
Fuse F048 in X051
Working range 9 - 16 VDC
Power consumption
approx. 0.5 A