![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_40018701067.webp)
Farmer 400
Fav 700
Fav 900
Electrics / system in general
X007 - implement socket cable coupler
E
Testing
900 > 23/3001
22.2.2001
9000
000089
E
b
3/3
Capitel
Docu-No.
Index
Date
Version
Page
X007 - implement socket cable coupler
PM-Picturemodule
Text-module
Text-module
UB = battery voltage (approx. 13.8 VDC)
Note:
Connect adapter cable (DIY) to implement socket X007.
(Measurement can also be carried out without adapter cable, though measurement errors are
possible because of small bush pins.)
Block diagram of implement socket X007
PMTAB_Picture
Component number Component
A005
EPC e-box
A007
Instrument panel
F051
+UB 15 supply fuse
X007
Implement socket
X051
Fuse holder 2
X100
Cable coupler to instrument panel A007 (blue)
X534
Vehicle body earth point
Readings and pins on implement socket X007
Pin
Signal
Reading
1
Radar signal - if available:
Speed 0-0.5 km/h
approx. 13.8 VDC (UB)
Speed greater than 0.5 km/h
approx. 6.5 VDC (UB2)
2
Transmission signal
Speed 0 km/h
approx. 13.8 VDC (UB)
Speed greater than 0.1 km/h
approx. 6.5 VDC (UB2)
3
PTO speed
PTO off
approx. 13.8 VDC (UB)
PTO on
approx. 6.5 VDC (UB2)
4
EPC rapid lift control
- actuation system on control console A004
- actuation system on joystick A003
Rapid lift control in Lower (Regulate) position
approx. 1 VDC
Rapid lift control in Stop position
approx. 1 VDC
Rapid lift control in Raise position
approx. 13.8 VDC (UB)
5
Not assigned
6
On-board power supply UB 15 (switched positive)
approx. 13.8 VDC (UB)
7
Earth at X534