![background image](http://html.mh-extra.com/html/tilmor/520y-diesel/520y-diesel_quick-start-manual_1116330001.webp)
Page 1
CAUTION
Coolant is poisonous to humans and animals and
is hazardous to the environment. Drain coolant into
an approved container. Dispose of used coolant in
accordance with local laws.
WARNING
Avoid Personal Injury!
Wear personal protective equipment to protect eyes
and hands when opening the radiator cap to protect
against the pressure in the radiator.
If coolant is spilled on skin or clothing, change
clothing and wash affected skin immediately.
WARNING
Avoid Personal Injury!
If the unit has been running, the radiator and radiator
coolant will be hot and can burn skin! Built-up
pressure in the radiator can cause an explosive
release of coolant if the radiator cap is removed:
•
Shut off the engine and allow to cool.
• Do not remove the radiator cap unless the
radiator and engine are cool enough to touch
with bare hands.
•
Slowly loosen the cap to the first stop to release
all of the pressure before removing completely.
1.
Attention
Avoid damage to your engine!
Using the incorrect coolant mixture and/or type can
cause engine damage. Use only a mixture of 50%
distilled water and 50% ethylene glycol antifreeze.
Recommended antifreeze: a low silicate, phosphate
free antifreeze (ethylene glycol) containing supple-
mental coolant additives (SCA’s) to inhibit corrosion
and rust.
Dye Color does not determine the antifreeze proper-
ties: ethylene glycol antifreeze of different colors can
be mixed.
Park the power unit on a level surface.
2.
Engage the parking brake and shut off the
engine.
3. Remove the key from the ignition switch and
allow the engine to cool.
4. Open the radiator access panel (A).
5.
Slowly open the radiator cap (B) to the first stop
to allow the pressure to release.
A
A
B
B
Release Date: 12/09/2019
Revision Number: 01
Revision Date: 01/12/2021
Tools Required:
7/16” or 11mm ID tube
Safety glasses must be worn during installation.
Ear (hearing) protection must be worn when us-
ing air or power tools.
Installation Time (estimated)
1 Hour
Installation Notes:
Right and left hand orienta-
tion referred to in these instructions is determined
as if facing forward from the operator station.
Engine Coolant Flush
Document Number Model
Serial Number Range
12-80016
520Y
All Units
Before making repairs or adjustments set the
parking brake, turn off the engine, and remove
the ignition key.
Always disconnect the negative battery cable
from the battery when working with electrical
components. Always work in a manner that does
not put safety at risk!