![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870800.webp)
Farmer 400
Fav 700
Fav 900
Power lift / Electrohydraulic control EPC
Operation and function of electronic slip control
A
General
Fav 900 chassis number 23/3001 and up
11.04.2001
8610
000006
A
a
4/5
Capitel
Docu-No.
Index
Date
Version
Page
Operation and function of electronic slip control
Text-module
Pull away in tractor and stop with front wheel on end mark of gauge length.
Press F1.
Note:
"Wheel slip setting" and "Radar calibration" are always displayed on terminal A008.
If no radar sensor A011 is connected, display is meaningless.
Note:
If radar sensor A011 is retrofitted, this must be input into end-of-line program (Fendias).
Text-module
Display changes from "GO" to "STOP".
If instructions have been followed correctly, "GO"
is displayed again.
If warning symbol (arrowed) is also displayed,
calibration procedure must be repeated.
Check whether input distance matches measured
distance.
Repeat calibration process.