![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870250.webp)
Fav 900
Transmission / Axle drives
Disassembly and reassembly of axle drives
G
Repair
17.09.2001
1015
000003
G
a
6/9
Capitel
Docu-No.
Index
Date
Version
Page
Disassembly and reassembly of axle drives
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Before bearing inner race cools down, insert
rear-axle shaft (31) using fitted mounting handles
(DIY, see photo) as far as stop.
PMTAB_Picture
Turn axle housing (15) round.
Heat inner race of taper roller bearing (27) to
approx. 80
°
C and press on as far as stop.
Lubricate rear-axle shaft bearing with
transmission oil.
PMTAB_Picture
Prop axle housing (15). Rear-axle shaft bearing
must have small amount of play.
Fit torque gauge X 899.980.150 and measure and
record rotational resistance of shaft seal,
e.g. 5.0 Nm.
PMTAB_Picture
Select thickness of adjusting washers (26) such
that split ring (25) can be inserted play-free.
Note:
If possible, fit adjusting washers (26) such that
1.0 mm thick adjusting washer (26) faces split
ring (25).