Farmer 400
Fav 700
Tractor / General system
Calibration code 4009
F
Setting and Calibration
12/1999
0000
000009
F
a
1/2
Capitel
Docu-No.
Index
Date
Version
Page
Calibration code 4009
Text-module
11. Calibrating turboclutch operation
Text-module
Bullet-List
Caution: following preparatory steps must be carried out.
●
Handbrake pulled on tight
●
Start engine
●
Tractor stationary (less than 0.01 km/h)
●
Engine speed 1100 rpm ± 40
●
During calibration engine speed falls to approx. 700 rpm
●
Engage range II via switch in armrest
●
Transmission oil temperature approx. 40
°
C
●
If error messages are displayed, faults must be individually cleared
Text-module
Text-module
First press key and hold,
then press key, and fault symbol is cleared. Clear other faults in same way
Press key, next pictogram displayed.
Key flashes
Press key, next pictogram displayed
Input code 4009
Press one of keys until desired number is displayed.
Store with key, following pictogram displayed
System runs through following five pictograms automatically