![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870236.webp)
Fav 900
Transmission / Differential
Reference dimension for bevel drive correction
G
Repair
Repair instructions
13.07.2001
1010
000005
G
a
1/1
Capitel
Docu-No.
Index
Date
Version
Page
Reference dimension for bevel drive correction
Text-module
The following points must be borne in mind when replacing the ring gear or a ring gear plus pinion
shaft:
PM-Picturemodule
PM-Picturemodule
Text-module
Please refer to the workshop manual for details of testing and adjusting the backlash and
gear-tooth contact pattern.
Text-module
EKI 07.01 Schr en
AGCO GmbH & Co.
Johann-Georg-Fendt-Str. 4 D-87616 Marktoberdorf
PMTAB_Picture
If eccentric bushes are inserted in the pin bores
(A), these must be removed.
Removing the eccentric bushes
●
Tap M14 thread in bore and withdraw bush using
M14 screw.
PMTAB_Picture
●
If stepped bolts are inserted in the housing (see
B), these must be removed and the bolts
supplied must be fitted.
Note:
If only the pinion shaft is replaced, the bushes
and stepped bolts remain in place.