TYM T474 Manual Download

Page: 1 / 175

FOREWORD

Thank you for purchasing our tractor. We are confident it will give you many years of reliable

ervice.

The introduction in this manual sets out the correct manner of operating, maintaining and checking the tractor

to ensure long-term durability.

Please ensure correct operation of the tractor as incorrect operation can cause substantial mechanical damage

as well as cause accidents with the associated injuries.

Please note that in some cases differences can exist between this manual and your tractor due to the manu-

facture’s policy of constant product improvement.

In the event that you encounter a problem not covered by this manual please contact your nearest dealer

who will assist you in resolving your problem.

WARNING

CALIFORNIA Proposition 65 Warning

The Engine Exhaust from this product contains chemicals known to

the

ate of California to cause cancer, birth defects or other repro-

ductive harm.

T474NH-영문-01A(안).indd 1

2019-03-06 오전 9:20:48

Summary of Contents for T474
















































































































































































Search results

Summary of Contents for T474

Reviews:

Related manuals for T474

Brands by name

Popular brands

TYM T474, Manual

Search results

Summary of Contents for T474

Reviews:

Related manuals for T474

Brands by name

Popular brands