background image

FOREWORD

 

Make sure to read this manual carefully and keep it handy for future reference.

 

When leasing or transferring this tractor, deliver this manual together with the tractor.

 

The specifications in this manual are subject to change without notice.

< NOTE >

Congratulations,  and  welcome  to  the  fabulous  world  of 

EX35(C)/EX40(C)/EX45(C)/EX50(C)

  ownership, 

where serious work is made fun again! 

This versatile tractor is a culmination of the entire tractor and diesel knowledge gained by the Daedong In

-

dustrial Co.,LTD over the years since 1947 and has been designed with the finest materials and under rigid 

quality control standards  set forth by the 

KIOTI

 Engineering Department.

Knowledge of tractor operation is essential for many years of dependable service and reliability. To help new 

owner's familiarize themselves with the 

KIOTI EX35(C)/EX40(C)/EX45(C)/EX50(C)

, it is the policy of 

KIOTI

 

tractor to provide an owner's manual which includes helpful information about tractor safety, operation and 

maintenance. If the information you seek is not found in this manual, your 

KIOTI

 tractor dealer will be happy 

to help you. 

Please feel free to contact 

DAEDONG IND. CO.,LTD

 with your questions/concerns. 

M47-EU-00.indd   1

2014-11-11   오후 4:09:45

Summary of Contents for KIOTI EX35















































































































































































































































Reviews: