Daedong Kioti RX6020 Manual Download

Page: 1 / 262

FOReWORD



Make sure to read this manual carefully and keep it handy for future reference.



When leasing or transferring this tractor, deliver this manual together with the tractor.



The specifications in this manual are subject to change without notice.

< NOTE >

Congratulations, and welcome to the world of

RX6020 / RX6620 / RX7320 / RX7620

ownership, where serious work is

made fun again!

This versatile tractor is a culmination of the entire scope of tractor and diesel engine knowledge gained by the

DAe-

DONG IND. Co., LTD

, since 1947 The

RX6020 / RX6620 / RX7320 / RX7620

has been designed with the finest materi

als, under rigid quality control standards set forth by the

KIOTI

Engineering Department.

Knowledge of tractor operation is essential for many years of dependable service and reliability. To help new owners fa

miliarize themselves with the

KIOTI RX6020 / RX6620 / RX7320 / RX7620

, it is the policy of

KIOTI

tractor to provide an

owners manual which includes helpful information about tractor safety, operation and maintenance. If the information

you seek is not found in this manual, your

KIOTI

tractor dealer will be happy to help you.

Please feel free to contact

DAeDONG IND. CO.,LTD / DAeDONG-USA, INC

. with your questions/concerns.

TF110(RX7320)ROPS합본-US,EU,AU-00.1 1

2016-06-07 오후 6:55:20

Summary of Contents for Kioti RX6020







































































































































































































































































Search results

Summary of Contents for Kioti RX6020

Reviews:

Related manuals for Kioti RX6020

Brands by name

Popular brands

Daedong Kioti RX6020, Manual

Search results

Summary of Contents for Kioti RX6020

Reviews:

Related manuals for Kioti RX6020

Brands by name

Popular brands