ABB RELION Series, Technical Manual

Page: 41 / 804

• Locally by connecting the laptop to the protection relay via the front
communication port.
• Remotely over LAN/WAN.
2.4 Authorization
Four user categories have been predefined for the LHMI and the WHMI, each with
different rights and default passwords.
The default passwords in the protection relay delivered from the factory can be
changed with Administrator user rights.
User authorization is disabled by default for LHMI but WHMI always
uses authorization.
Table 3: Predefined user categories
Username User rights
VIEWER Read only access
OPERATOR •
Selecting remote or local state with (only locally)
• Changing setting groups
• Controlling
• Clearing indications
ENGINEER • Changing settings
• Clearing event list
• Clearing disturbance records
• Changing system settings such as IP address, serial baud rate or
disturbance recorder settings
• Setting the protection relay to test mode
• Selecting language
ADMINISTRATOR • All listed above
• Changing password
• Factory default activation
For user authorization for PCM600, see PCM600 documentation.
2.4.1 Audit trail
The protection relay offers a large set of event-logging functions. Critical system and
protection relay security-related events are logged to a separate nonvolatile audit trail
for the administrator.
1MRS758755 A
Section 2
REC615 and RER615 overview
REC615 and RER615 35
Technical Manual