Lucent Technologies WaveStar OLS 40G, Руководство по установке

Страница: 552 / 578

E-10
Issue 1.0 March 2001
365-575-389
Installation Manual
Harris C-1000 Centurion Installation —Extended
Miscellaneous Discretes
Installation Procedure
Description A complete and detailed installation procedure is provided in the Harris C1000
User Guide provided with the Centurion C-1000. The following procedure is
provided to facilitate its use with Lucent’s Release 2.0 and subsequent releases of
Optical Line System.
Assembly
Powering the Unit
Step Action
1 Attach the Mounting Brackets to the Harris C-1000 Centurion.The
Mounting Brackets are then front mounted to the distribution frame.
2 Run the ED-7G028-22 cable from the SER TLM1 port of the OLS to J9 on
the rear of the C-1000 Centurion (See Figure 2-1 of the C-1000 Centurion
User Guide).
3 J1 - J8 are the ports to be used for inputs and control outputs (See Table
2-1 of the C-1000 Centurion User Guide).
Step Action
1 Power must be provided from a fuse panel using #14 to #24 (#20 is
optimum) AWG power and ground wire. The input voltage range is –20 to
–60 VDC. Fuse protection should be removed before inserting or
removing power wires.
2 Power connections are located at J11 on the rear panel of the C1000
Centurion (See Figure 2-1 in the C-1000 Centurion User Guide). The
Positive and Negative connections are marked at J11 (See also
Figure 2-2 in the C-1000 Centurion User Guide).