Lucent Technologies WaveStar OLS 40G, Руководство по установке

Страница: 299 / 578

Issue 1.0 March 2001
6-71
365-575-389
Installation Manual WaveStar OLS 40G Fiber and Circuit Pack Installation
Two OA/Two OA Dual Facing Shelf
Installation (Continued)
Fiber Jumper
Installation
(continued) Table 6-25. Two OA Dual Facing Shelf Low-Speed Fiber Jumper — Line 2
(continued)
Outside Plant LGX Fiber Jumper Installation
Install the fiber jumpers from the WaveStar OLS 40G to the outside plant LGX for
each line by adding the labels from Installation Kit C848065959 then routing the
fibers by referring to Figure 6-14 and Table 6-26.
!
CAUTION:
Do not connect either end to the fiber jumper at this time.
(Continued on next page)
Application Line
Circuit
Pack Connector
Label to
Install for
Lower Shelf
Label to
Install for
Upper Shelf
Dual 2-Line
Two OA Dual
Facing Shelf
Refer to
Figure 6-14
for connection
points.
2 ODU 2B OCHAN7 OUT LOWER 2D7 UPPER 2D7
ODU 2B OCHAN8 OUT LOWER 2D8 UPPER 2D8
ODU 2B OCHAN9 OUT LOWER 2D9 UPPER 2D9
ODU 2B OCHAN10 OUT LOWER 2D10 UPPER 2D10
ODU 2B OCHAN11 OUT LOWER 2D11 UPPER 2D11
ODU 2B OCHAN12 OUT LOWER 2D12 UPPER 2D12
ODU 2B OCHAN13 OUT LOWER 2D13 UPPER 2D13
ODU 2B OCHAN14 OUT LOWER 2D14 UPPER 2D14
ODU 2B OCHAN15 OUT LOWER 2D15 UPPER 2D15
ODU 2B OCHAN16 OUT LOWER 2D16 UPPER 2D16