Lucent Technologies WaveStar OLS 40G, Руководство по установке

Страница: 220 / 578

5-64
Issue 1.0 March 2001
365-575-389
Installation Manual
Wired Cable Installation
OLS/OT Integration Cables
Installation (Continued)
Rack and Stack
Configurations
(continued)
Cable installation for Bays 1-3 continues:
(Continued on next page)
Step Action
20 Remove the ED-7G045-20 Group 2 Termination from the
Complementary Shelf 1 connector J7 of Bay 2 and plug it into
Complementary Shelf 2 connector J7 of Bay 2.
21 Route the P7 end of the ED-7G045-20 G6 cable through the left side of
the OT Complimentary 1 Shelf of Bay 2 and attach P7 to the J7 CTL OUT
connector.
22 Route the P6 end of the same cable through the left side of the OT
Complimentary 2 shelf in Bay 2 and attach P6 to the J6 CTL IN
connector.
23 Route the P10 end of the ED-7G045-20 G8 cable through the right side of
the OT System Controller Shelf of Bay 2 and attach P10 to the J10 EQPG
IN 2 connector.
24 Route the P8 end of the same cable through the right side of the OT
Complimentary 2 shelf in Bay 2 and attach P8 to the J8 EQPG OUT
connector.
25 Route the P14 end of the ED-7G045-20 G10 cable through the right side
of the OT System Controller Shelf of Bay 2 and attach P14 to the J14
RESET OUT 2 connector.
26 Route the P16 end of the same cable through the right side of the OT
Complimentary 2 shelf in Bay 2 and attach P16 to the J16 RESET IN
connector.
27 Route the P7 end of the ED-7G045-20 G11A (or G11, G11B) cable
through the left side of the OT Complimentary 1 Shelf of Bay 1 (top shelf)
and attach P7 to the J7 CTL OUT connector.
28 Route the P6 end of the same cable through the left side of the top OT
Complimentary 2 shelf in Bay 3 and attach P6 to the J6 CTL IN
connector.
29 Route the P10 end of the ED-7G045-20 G8A (or G8, G8B) cable through
the right side of the OT System Controller Shelf of Bay 1 (middle shelf)
and attach P10 to the J10 EQPG IN 2 connector.