Lucent Technologies WaveStar OLS 40G, Руководство по установке

Страница: 223 / 578

Issue 1.0 March 2001
5-67
365-575-389
Installation Manual Wired Cable Installation
OLS/OT Integration Cables
Installation (Continued)
Rack and Stack
Configurations
(continued)
Cable installation for Bays 3-5 continues:
(Continued on next page)
Step Action
13 Route the P7 end of the ED-7G045-20 G6 cable through the left side of
the OT System Controller Shelf of Bay 4 and attach P7 to the J7 CTL
OUT connector.
14 Route the P6 end of the same cable through the left side of the OT
Complimentary 1 shelf in Bay 4 and attach P6 to the J6 CTL IN
connector.
15 Route the P9 end of the ED-7G045-20 G7 cable through the left side of
the OT System Controller Shelf of Bay 4 and attach P9 to the J9 EQPG
IN 1 connector.
16 Route the P8 end of the same cable through the left side of the OT
Complimentary 1 shelf in Bay 4 and attach P8 to the J8 EQPG OUT
connector.
17 Route the P13 end of ED-7G045-20 G9 cable through the left side of the
OT System Controller Shelf of Bay 4 and attach P13 to J13 RESET OUT
1 connector.
18 Route the P16 end of the same cable through the left side of the OT
Complimentary 1 shelf in Bay 4 and attach P16 to the J16 RESET IN
connector.
19 Remove the ED-7G045-20 Group 2 Termination from the Complimentary
Shelf 1 connector J7 of Bay 4 and plug it into Complementary Shelf 2
connector J7 of Bay 4.
20 Route the P7 end of the ED-7G045-20 G6 cable through the left side of
the OT Complimentary 1 Shelf of Bay 4 and attach P7 to the J7 CTL OUT
connector.
21 Route the P6 end of the same cable through the left side of the OT
Complimentary 2 shelf in Bay 4 and attach P6 to the J6 CTL IN
connector.
22 Route the P10 end of the ED-7G045-20 G8 cable through the right side of
the OT System Controller Shelf of Bay 4 and attach P10 to the J10 EQPG
IN 2 connector.