Lucent Technologies WaveStar OLS 40G, Руководство по установке

Страница: 206 / 578

5-50
Issue 1.0 March 2001
365-575-389
Installation Manual
Wired Cable Installation
OLS/OT Integration Cables
Installation (Continued)
Rack and Stack
Configurations
(continued)
(Continued on next page)
Step Action
4 Attach P8-1 to the J8 EQPG OUT connector on the OT System Controller
Shelf in Bay 1 (middle shelf).
5 Attach P16-1 to the J16 RESET IN connector on the OT System
Controller Shelf in Bay 1.
6 Route the P8-2 and P16-2 ends of the same cable through the left side of
the second OT System Controller shelf in Bay 2, to the interconnection
panel.
7 Attach P8-2 to the J8 EQPG OUT connector on the OT System Controller
Shelf in Bay 2.
8 Attach P16-2 to the J16 RESET IN connector on the OT System
Controller Shelf in Bay 2.
9 Remove the ED-7G045-20 G2 Termination from J7 on the
interconnection panel of the top shelf, OT Complimentary 1 Shelf in Bay
1.
10 Route the P7 end of the ED-7G028-22 G806 cable through the right side
of the OT Complimentary 1 Shelf in Bay 1 (top shelf) and attach to the J7
CTL OUT connector .
11 Route the P6 end of the same cable through the left side of the OT
System Controller Shelf in Bay 2.
12 Remove the ED-7G045-20 G2 termination from the J6 CTL IN of the OT
System Controller Shelf in Bay 2 and attach P6 to the J6 connector.
13 Remove the ED-7G028-20 G6 termination from J15 on the OLS shelf in
Bay 1 and discard.
14 Route the P15 end of the ED-7G028-22 G803 cable through the right
side of the OLS shelf in Bay 1 and attach to the J15 BUS IN connector.