Lucent Technologies WaveStar OLS 40G, Руководство по установке

Страница: 447 / 578

Issue 1.0 March 2001
10-11
365-575-389
Installation Manual Fiber Connections
DS-NE Office Transmit OA Connection
Procedure (Continue)
Line 1 Connection
Procedures
(continued)
Table 10-4. Output Levels for Releases 2.1 and Subsequent Releases
(Continued on next page)
Step Action Reference
2 Clean and then connect 1A OA OUT to an optical power
meter. Use attenuated test cable if necessary. Test point
1P on Figure 10-2 on page 10-12
3 Verify the OA Output Power by referring to Table 10-4
on page 10-11.
4 Clean and then connect the fiber jumper to 1A OA OUT
and to the outside plant fiber at the LGX. (Test point 1P
on Figure 10-2 on page 10-12). For 7-8 span
applications, place a 3dB LBO on the OA OUT port
before connecting the fiber.
# of equipped
wavelengths
OA Type Side Power Configuration OA Output Power
0 LEA7
LEA7B A 8 to 12 dB
B 7 to 11dB
C 4 to 8 dB
LEA104 A 8 to 12 dB
B 7 to 11dB
LEA105 A 4 to 8 dB
1_OA 4 to 8 dB