Lucent Technologies WaveStar OLS 40G, Руководство по установке

Страница: 217 / 578

Issue 1.0 March 2001
5-61
365-575-389
Installation Manual Wired Cable Installation
OLS/OT Integration Cables
Installation (Continued)
Rack and Stack
Configurations
(continued)
Each of the OT Complimentary Shelf 2 (List 13) installed as the top shelf in Bay 2
or Bay 4 will be supplied with the following cables, however they may not be pre
installed:
Table 5-35. Cables supplied with OT Comp. 2 Shelf (List 13), Bay 2 or Bay 4
Each of the OT Complimentary Shelf 2 (List 13) installed as the top or bottom
shelves in Bay 3 will be supplied with the following cables:
Table 5-36. Cables supplied with OT Comp. 2 Shelf (List 13), Bay 3
NOTE:
The varying group number suffixes indicate different lengths of the cable,
which may change depending on the physical mounting location of the
shelf. No suffix indicates a seven foot cable (7’), an “A” suffix indicates a 9’
(nine foot) cable and the “B” suffix indicates an 11’6” cable (eleven foot, six
inches).
Two each of three additional cables are required for the Five-Bay Rack and Stack
configuration, and are listed in Table 5-32.
(Continued on next page)
ED Cable Group Connectors
7G045-20 6 J7 CTL OUT J6 CTL IN
7G045-20 8 J10 EQPG IN 2 J8 EQPG OUT
7G045-20 10 J14 RESET
OUT 2 J16 RESET IN
ED
Cable Group
(see note) Connectors
7G045-20 11/11A/11B J7 CTL OUT J6 CTL IN
7G045-20 8/8A/8B J10 EQPG IN 2 J8 EQPG OUT
7G045-20 10/10A/10B J14 RESET
OUT 2 J16 RESET IN