Lucent Technologies WaveStar OLS 40G, Руководство по установке

Страница: 380 / 578

8-14
Issue 1.0 March 2001
365-575-389
Installation Manual
Network Element Startup and Provisioning
Initial Provisioning (Continued)
Basic Network
Element
Provisioning Using the following steps, set and/or specify the following provisionable
parameters:
n
Set the new Target ID (TID) of the network element,
n
Set the alarm-reporting standard to SONET or SDH,
n
Set the Alarm Group,
n
Set the X.25 Packet size,
n
Indicate whether or not the NE will utilize X.25 redirect,
n Indicate whether or not the NE will have through wavelength connections,
n Specify if this NE is the Alarm Gateway Network Element (AGNE),
n Specify if this NE is the Directory Server-Network Element (DS-NE),
n Specify if this NE is a 1A-TX, 1A-TX-THRU, 1A-RCV, 1A-RCV-THRU, or
Dual Facing Shelf (RPTR is an automatic setting and need not be
specified),
n Specify the OA pump power setting, A, B, C, or 1_OA.
n Specify if the APSD is enabled or disabled (default is ENABLED)
!
DANGER:
Disabling the Automatic Power Shut-Down (APSD) feature results in a FDA/
IEC Class IIIb/3B laser hazard. APSD is a safety feature. Do not attempt to
defeat or disable APSD. Defeating APSD may result in harm to personnel
exposed to disconnected or cut optical fibers.
!
CAUTION:
To comply with IEC regulations, systems containing an IEC Class3B laser
hazard must be installed in a controlled environment. Please refer to
applicable IEC standards.
(Continued on next page)
Step Action Reference
1 Log into the NE as an EXPERT user.
2 Select SECURITY>Enter>System. Figure 8-5