Lucent Technologies WaveStar OLS 40G, Руководство по установке

Страница: 222 / 578

5-66
Issue 1.0 March 2001
365-575-389
Installation Manual
Wired Cable Installation
OLS/OT Integration Cables
Installation (Continued)
Rack and Stack
Configurations
(continued)
Cable installation for Bays 3-5 continues:
(Continued on next page)
Step Action
2 Route the P27 end of the ED7G028-22 Group 812 cable through the right
side of the OLS shelf of Bay 5 and attach to the J27 CTL OUT (B)
connector on the OLS interconnection panel from which the G29 cable
was removed in Step 1.
3 Route the P8-1/P16-1 ends of the same cable through the right side of
the OT System Controller Shelf (middle shelf of Bay 5) to the
interconnection panel.
4 Attach P8-1 to the J8 EQPG OUT connector on the OT System Controller
Shelf in Bay 5 (middle shelf).
5 Attach P16-1 to the J16 RESET IN connector on the OT System
Controller Shelf in Bay 5.
6 Route the P8-2 and P16-2 ends of the same cable through the left side of
the second OT System Controller shelf in Bay 4, to the interconnection
panel.
7 Attach P8-2 to the J8 EQPG OUT connector on the OT System Controller
Shelf in Bay 4.
8 Attach P16-2 to the J16 RESET IN connector on the OT System
Controller Shelf in Bay 4.
9 Remove the ED-7G045-20 G2 Termination from J7 on the
interconnection panel of the top shelf, OT Complimentary 1 Shelf in Bay
5.
10 Remove the ED-7G045-20 G6 termination from the J15 connector of the
OLS shelf in Bay 5.
11 Route the P15 end of the ED7G028-22 G803 cable through the right side
of the OLS shelf in Bay 5 and attach to the J15 BUS IN connector.
12 Route the P5 end of the same ED7G028-22 G803 cable through the left
side of the OT System Controller Shelf of Bay 4.