Lucent Technologies WaveStar OLS 40G, Руководство по установке

Страница: 231 / 578

Issue 1.0 March 2001
6-3
365-575-389
Installation Manual WaveStar OLS 40G Fiber and Circuit Pack Installation
Background (Continued)
General
Considerations
!
CAUTION:
A wrist strap connected to a wrist strap ground jack on the terminal must be
worn for ESD protection during the installation process.
!
CAUTION:
Connectors on the interconnect panel come equipped with protective ESD
covers. These covers should be left in place on any connector that is not
being immediately cabled so that ESD protections are maintained.
!
WARNING:
Unterminated optical connectors may emit laser radiation and should not be
viewed with optical instruments (other than indirect image-converting
devices). Avoid direct exposure to beam.
Keep the following information under consideration during cable installation:
■
This cable information is the latest cable information available at the time of
the issue. For up-to-date information, refer to the ED cable drawings listed
in the
Chapter 1, Overall Installation and Test Considerations .
■
For ordering information for the WaveStar OLS 40G or for the Optical
Translator (OT), refer to the 365-575-386 WaveStar OLS 40G Application,
Planning, and Ordering Guide (APOG).
■
Do not use cable ties with the optical fiber.
■
Place optical fiber jumpers in protective tube, channel, or duct, such as the
polyvinyl chloride (PVC) tubing provided in Installation Kit C848065959,
when running the cable from the shelves to the cable rack.
■
Place optical fiber jumpers in the cable rack in a protective channel with
nothing on top of them.
■
Maintain a minimum of 1.5 inches of optical fiber bend radius.
■
Optical fiber jumpers require ST, FC, or SC type connectors for connection
to the WaveStar OLS 40G.
■
Do not remove the backplane cover during the installation process.