Yamaha WR250F(R), Owner'S Service Manual, Page: 180 / 860

SPEC
2 - 101
CABLE ROUTING DIAGRAM
Ö
Fasten the neutral switch lead and AC magneto lead.
×
Pass the cylinder head breather hose on the inside of the radi-
ator hose 1 and on the outside of the radiator pipe (radiator
hose 4). Make sure that the cylinder head breather hose does
not go forward of the chassis.
Ø
Pass the starter motor lead in front of the radiator hose 4.
Ù
Pass the clutch cable through the cable guide.
Ú
Pass the wire harness on the outside of the neutral switch lead
and AC magneto lead.
Û
Fit the brake hose into the guides on the protector.
Ü
Pass the wire harness, clutch cable and light switch lead
through the cable guide.
Ý
Fasten the AC magneto lead, neutral switch lead and light
switch lead to the cable guide at their protecting tube with a
plastic locking tie and cut off the tie end.
Þ
Pass the carburetor breather hoses, carburetor overflow hose
and coolant reservoir breather hose so that the hoses do not
contact the rear shock absorber.