CDMA2000 Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
540
User Manual 1173.9511.02 ─ 11
DAU is required for "SO 33 (Packet Data)", see also
chapter 4.2.3, "End to End Packet
For the background information refer to
chapter 4.2.10, "Service Options "
Remote command:
Radio Configuration (Fwd/Rev)
Preconfigures the initial values of the Radio Configuration (RC) to be proposed to the
MS during the next connection setup. The available values for the forward and reverse
fundamental channel depend on the selected "1st Service Option".
Additionally, the modulation resulting from the specified radio configuration is dis-
played.
For the connection reconfiguration during the call use the hotkey "Reconfigure ...", see
The values negotiated and used for the current connection are displayed in the main
view, see
For the background information refer to
chapter 4.2.11, "Radio Configurations"
Remote command:
Code Channels
Configures the main parameters of the physical channels.
For background information see
chapter 4.2.9, "Physical Forward Channels"
Level ← Code Channels
Defines the level of the forward channels relative to the "CDMA Power" (see
). For details about the power levels see
chapter 4.2.9.3, "Power Levels"
●
For FCH/SCH0
:
The field "FCH Eb/Nt"/"SCH0 Eb/Nt"displays the calculated signal to noise ratio of
the F-FCH/F-SCH0. The value is displayed while the AWGN is turned on (see
). Otherwise Eb/Nt is undefined as the noise level Nt tends to zero.
"Level and Frame Rate Dependencies for F-FCH"
●
For OCNS
:
Activates or deactivates the Orthogonal Channel Noise Simulator (OCNS) chan-
nels and displays the total OCNS channel power relative to the "CDMA Power"
value. OCNS channels are generated if the total power of all active channels is
GUI Reference
深圳德标仪器
135-1095-0799
