R&S CMW-KG8 Series, User Manual, Page: 74 / 964

1xEV-DO Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
74 User Manual 1173.9511.02 ─ 11
Fig. 2-29: 1xEV-DO carrier configuration
RF Frequency ............................................................................................................... 74
RF Level ........................................................................................................................74
Pilot ............................................................................................................................... 75
RF Frequency
Carrier[0] is the reference carrier for the selected band class (see chapter 2.4.7.3, "RF
Frequency" , on page 70).
Make sure the active carriers don't overlap, i.e. their center frequencies have to be
separated by at least CDMA system bandwidth (1.23 MHz for band class 3 JTACS,
1.25 MHz for all other band classes). Otherwise connection setup will fail.
"Offset to RF", "Forward Link Frequency" and "Reverse Link Frequency" are derived
values and are displayed for information.
The RF frequency settings can be changed in all main connection states. Changing the
RF frequency via this section causes an implicit channel handoff. Use the "Handoff"
dialog to perform a standard handoff (see
"Handoff (Hotkey)" on page 60).
Remote command:
CONFigure:
​
EVDO:
​
SIGN<i>:
​
CARRier:
​
SETTing
​
CONFigure:
​
EVDO:
​
SIGN<i>:
​
CARRier:
​
CHANnel
​
CONFigure:
​
EVDO:
​
SIGN<i>:
​
CARRier:
​
FLFRequency?
​
CONFigure:
​
EVDO:
​
SIGN<i>:
​
CARRier:
​
RLFRequency?
​
RF Level
"Carrier[0]" is the reference carrier whose "1xEV-DO Power" (= "Absolute Level") can
also be set under
RF Power .
The "Absolute Level"s of "Carrier[1]" and "Carrier[2]" are determined by their "Relative
Level"s (in dB) compared to "Carrier[0]".
GUI Reference
深圳德标仪器
135-1095-0799