1xEV-DO Measurements
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
434
User Manual 1173.9511.02 ─ 11
FETCh:EVDO:MEAS<i>:MEValuation:LIST:DWCP:WTFI:AVERage?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:DWCP:WTFI:CURRent?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:DWCP:WTFI:MAXimum?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:DWCP:WTFI:MINimum?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:DWCP:WTFQ:AVERage?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:DWCP:WTFQ:CURRent?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:DWCP:WTFQ:MAXimum?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:DWCP:WTFQ:MINimum?
Returns the scalar channel power for the Data channel results for all active list mode
segments.
WOT
represents W
01
2
(Walsh code
O
ne
T
wo) and
WTF
represents W
2
4
(Walsh code
T
wo
F
our).
The values described below are returned by
FETCh
commands.
CALCulate
com-
mands return limit check results instead, one value for each result listed below.
Return values:
<Reliability>
chapter 3.5.1.6, "Reliability Indicator"
<Power>
Comma separated list of values, one per active segment.
Range:
-60 dB to +10 dB
Default unit: dB
Example:
See
Performing Single-Shot Measurements
Usage:
Query only
Firmware/Software:
V3.0.10
Options:
R&S CMW-KM012
For additional information concerning syntax elements and returned values refer to
Conventions and General Information
.
FETCh:EVDO:MEAS<i>:MEValuation:LIST:OBW<number>:FREQuency:LOWer?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:OBW<number>:FREQuency:UPPer?
Returns lower and upper OBW frequencies for all active list mode segments.
The values are taken from the "CURRent" measurement.
The values described below are returned by
FETCh
commands.
CALCulate
com-
mands return limit check results instead, one value for each result listed below.
Suffix:
<number>
.
1..4
Selects the isolated carrier or group carrier to be analyzed.
Return values:
<Reliability>
chapter 3.5.1.6, "Reliability Indicator"
<Freq>
Comma separated list of values, one per active segment.
Range:
- 16 to 6000 MHz
Default unit: Hz
Command Reference
深圳德标仪器
135-1095-0799
