1xEV-DO Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
156
User Manual 1173.9511.02 ─ 11
<TXConnector>
RF1C | RF1O | RF2C | RF3C | RF3O | RF4C | RFAC | RFAO |
RFBC
RF connector for the output path
<TXConverter>
TX1 | TX2 | TX3 | TX4
TX module for the output path
Example:
See
Firmware/Software:
V3.2.80
Options:
R&S CMW-KE100 and R&S CMW-KE800
Manual operation:
See
ROUTe:EVDO:SIGN<i>:SCENario:SCFading[:EXTernal]
<RXConnector>,
<RXConverter>, <TXConnector>, <TXConverter>, <IQConnector>
Activates the "Standard Cell Fading: External" scenario and selects the RF connectors,
RX/TX modules and digital I/Q output connector to be used. To query the active sce-
nario, use
.
Depending on the installed hardware and the active sub-instrument or instance <i>
only a subset of the described parameter values is allowed. The *RST values and the
mapping of virtual connector names to physical connectors also depend on the active
sub-instrument or instance <i>.
All instruments are equipped with the RF 1 and RF 2 connectors and one RX and TX
module. Additional RF connectors and RX/TX modules are optional.
See also: "Signal Path Settings" in the R&S
CMW user manual, chapter "Remote Con-
trol"
Connector names:
●
RF1C | RF2C | RF3C | RF4C = RF 1 COM to RF 4 COM, front panel
●
RFAC | RFBC = virtual names for the RF COM connectors
●
RF1O | RF3O = RF 1 OUT | RF 3 OUT, front panel
●
RFAO = virtual name for the RF OUT connectors
●
IQ2O | IQ4O | IQ6O | IQ8O = DIG IQ OUT 2 to 8, rear panel
Parameters:
<RXConnector>
RF1C | RF2C | RF3C | RF4C | RFAC | RFBC
RF connector for the input path
<RXConverter>
RX1 | RX2 | RX3 | RX4
RX module for the input path
<TXConnector>
RF1C | RF1O | RF2C | RF3C | RF3O | RF4C | RFAC | RFAO |
RFBC
RF connector for the output path
<TXConverter>
TX1 | TX2 | TX3 | TX4
TX module for the output path
Command Reference
深圳德标仪器
135-1095-0799
