R&S CMW-KG8 Series, User Manual, Page: 643 / 964

CDMA2000 Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
643 User Manual 1173.9511.02 ─ 11
Firmware/Software: V3.2.80
Options: R&S CMW-KS810 required for SO32 and SO8000
R&S CMW-KA100 required for SO33
Manual operation: See "1st Service Option" on page 539
CONFigure:CDMA:SIGN<i>:PREConfigure:LAYer:RCONfig <RadioConfig>
Preconfigures the radio configuration to be proposed to the MS during the next con-
nection setup.
Parameters:
<RadioConfig> F1R1 | F2R2 | F3R3 | F4R3 | F5R4
The allowed values for the forward and reverse fundamental
channel depends on the "1st Service Option".
*RST:
F1R1
Example: See Service Configuration
Firmware/Software: V3.2.80
Manual operation: See "Radio Configuration (Fwd/Rev)" on page 540
CONFigure:CDMA:SIGN<i>:REConfigure:LAYer:SOPTion:FIRSt <ServiceOption>
Sets the primary service option to be proposed to the MS during an active connection.
Trigger the reconfiguration of the current connection via
CALL:
​
CDMA:
​
SIGN<i>:
​
REConfigure:
​
STARt
​
.
Parameters:
<ServiceOption> SO1 | SO2 | SO3 | SO9 | SO17 | SO32 | SO33 | SO55 | SO68 |
SO8000 | SO70 | SO73
Speech Services : SO1 , SO3 , SO17 , SO68 , SO70 , SO73 and
SO8000 used for a voice call to the MS
Loopback Services : SO2 , SO9 and SO55 used for testing; e.g.
for the CDMA2000 RX FER FCH tests.
Test Data Service : SO32 used for testing of the high data rates
using the supplemental channel SCH0; e.g. for the CDMA2000
RX FER SCH0 tests.
Packet Data Service : SO33 used for PPP connection between
the MS and DAU; see Packet Data Service .
*RST: SO1
Example: See Set up a Connection
Firmware/Software: V3.2.80
Options: R&S CMW-KS810 required for SO32 and SO8000
R&S CMW-KA100 required for SO33
Manual operation: See "Reconfigure ... (Hotkey)" on page 525
Command Reference
深圳德标仪器
135-1095-0799