R&S CMW-KG8 Series, User Manual

Page: 659 / 964

CDMA2000 Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
659 User Manual 1173.9511.02 ─ 11
CONFigure:CDMA:SIGN<i>:SCONfig:LOOP:FRATe <FrameRate>
Sets the frame rate of the F-FCH to Full, Half, Quarter, or Eighth.
Parameters:
<FrameRate> FULL | HALF | QUARter | EIGHth
FULL : Frames at the full rate set.
HALF : Frames at 1/2 of the rate set.
QUARter : Frames at 1/4 of the rate set.
EIGHth : Frames at 1/8 of the rate set.
*RST: FULL
Example: See Service Configuration
Firmware/Software: V1.0.15.0
Manual operation: See "Frame Rate" on page 549
CONFigure:CDMA:SIGN<i>:SCONfig:LOOP:PGENeration <PGeneration>
Sets the type of pattern the R&S CMW generates and sends to the MS.
Parameters:
<PGeneration> RAND | FIX
RAND : Random: Sends a random pattern to the MS and is the
preferred method to obtain the best measurement performance.
FIX : Fixed: Sends the bit pattern defined with the pattern com-
mand (
CONFigure:
​
CDMA:
​
SIGN<i>:
​
SCONfig:
​
LOOP:
​
PATTern
​
). The R&S CMW generates one fundamental data
block to the MS. After a delay to allow for processing, the MS
sends one reverse fundamental data block back to the
R&S
CMW. The R&S CMW can set the bits within a data block
to a random pattern or any desired value (fixed).
*RST:
RAND
Example: See Service Configuration
Firmware/Software: V1.0.15.0
Manual operation: See "Pattern Generation" on page 549
CONFigure:CDMA:SIGN<i>:SCONfig:LOOP:PATTern <Pattern>
Defines the bit pattern that the pattern generator uses to send to the MS for measure-
ments. This pattern is used if "Pattern Generation" (
CONFigure:
​
CDMA:
​
SIGN<i>:
​
SCONfig:
​
LOOP:
​
PGENeration
​
) is set to FIXED .
Parameters:
<Pattern> String to specify the pattern.
*RST:
#HA5A5A5A5A5A5A5A5
Example: See Service Configuration
Command Reference
深圳德标仪器
135-1095-0799