1xEV-DO Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
90
User Manual 1173.9511.02 ─ 11
Requires option R&S CMW-KS890.
Fig. 2-39: Connection layer settings for subtype 0/1
........................................................................................... 90
.......................................................................................90
Pilot Drop Threshold
Pilot power (relative to the total "1xEV-DO Power") below which the AT starts the pilot
supervision timer and eventually announces that it has lost the network connection.
Remote command:
Reverse Link Frame Offset
Delays the Reverse Traffic Data Channel and Reverse Rate Indicator Channel (RRI)
transmissions of the AT by an integer number of slots with respect to the system time-
aligned frame boundary. This parameter is one of the parameters in the Traffic Chan-
nel Assignment message which is built and sent by the Route Update Protocol.
Remote command:
Redirect Overhead Messages
Sets the 'Redirect' bit in the QuickConfig Message of the Overhead Messages Protocol
to '1', i.e. if the AN is redirecting all ATs away from this AN.
Remote command:
2.4.8.7
MAC Layer - General Settings
The MAC layer procedures are used to transmit and receive over the Physical Layer.
The following parameters configure the general portion of the Medium Access Control
(MAC) layer signals.
●
The Control Channel MAC Protocols (Default/Enhanced) provide the procedures
and messages required for an access network to transmit and for an AT to receive
the Control Channel.
●
The Access Channel MAC Protocols (Default/Enhanced) provide the procedures
followed by the AT to transmit, and by the AN to receive the Access Channel.
●
The Forward Traffic Channel MAC Protocols (Default/Enhanced/MultiCarrier) pro-
vides the procedures followed by the AN to transmit, and by the AT to receive the
GUI Reference
135-1095-0799
