R&S CMW-KG8 Series, User Manual, Page: 357 / 964

1xEV-DO Measurements
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
357 User Manual 1173.9511.02 ─ 11
Parameters:
<ACPSetting> Range: -80 dBc to 10 dBc
*RST: For offset frequencies 19 to 0 all OFF [dBc]:
-54,-54,-54,-54,-54,-54,-54,-54,-54,-54,-54,-54,-54,-
54,-54,-54,-54,-43,-43,-43
Default unit: dBc
Additional parameters: ON | OFF (enables | disables the limit
check)
Example: See Multi Evaluation Limits
Firmware/Software: V3.2.20
Manual operation: See "Limits" on page 291
CONFigure:EVDO:MEAS<i>:MEValuation:LIMit:ACP:EXTended:UPPer[:RELative]
<ACPSetting>(20)
Defines upper limits 0 to 19 for the extended ACP measurement in dBc of the selected
carrier (see
CONFigure:
​
EVDO:
​
MEAS<i>:
​
MEValuation:
​
CARRier:
​
SELect
​
) at the
individual negative offset frequencies (set via
CONFigure:
​
EVDO:
​
MEAS<i>:
​
MEValuation:
​
ACP:
​
FOFFsets:
​
LOWer
​
).
The limit index 0 to 19 corresponds to the index used in manual control.
Parameters:
<ACPSetting> Range: -80 dBc to 10 dBc
*RST: For offset frequencies 0 to 19 all OFF [dBc]:
-43,-43,-43,-54,-54,-54,-54,-54,-54,-54,-54,-54,-54,-
54,-54,-54,-54,-54,-54,-54
Default unit: dBc
Additional parameters: OFF | ON (enables | disables the limit
check)
Example: See Multi Evaluation Limits
Firmware/Software: V3.2.20
Manual operation: See "Limits" on page 291
CONFigure:EVDO:MEAS<i>:MEValuation:LIMit:OBW:MULTi <OBWLimit>
Gets/sets the overall occupied bandwidth limit and the state of the limit check for multi-
carrier configurations.
Parameters:
<OBWLimit> Range: 0 MHz to 16 MHz
*RST: 16 MHz
Additional parameter values: OFF | ON (disables | enables the
limit check)
Example: See Multi Evaluation Limits
Firmware/Software: V2.1.20
Command Reference
深圳德标仪器
135-1095-0799