R&S CMW-KG8 Series, User Manual

Page: 527 / 964

CDMA2000 Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
527 User Manual 1173.9511.02 ─ 11
Select as fixed Target
Sets the selected measurement as fixed target of the softkey. The softkey label indi-
cates the measurement name and switches directly to the selected target without
opening the dialog box.
You can still change the target measurement or re-enable the dialog box using the
configuration menu, see
chapter 4.3.11, "Shortcut Configuration" , on page 572.
Go to / Cancel
Click "Go to" to switch to the selected measurement or "Cancel" to abort.
4.3.4 General Settings
These settings are located at the very top of the configuration dialog.
Fig. 4-28: General settings
Scenario ...................................................................................................................... 527
Enable Speech Codec ................................................................................................ 528
Scenario
In general, this parameter switches between test scenarios that require different sets of
parameters. Some parameters are only available for certain scenarios or have a differ-
ent meaning depending on the selected scenario.
The parameter is only configurable while the forward signal is switched off.
●
Standard Cell : standard CDMA2000 cell with only one RF output path.
●
Hybrid Mode : enables Hybrid Mode on a Single SUU .
●
Standard Cell Fading :
"Standard Cell" plus fading and/or AWGN insertion.
Additional parameter "Fading" selects either external fading via a connected R&S
AMU200A or internal fading via an internal fader I/Q board.
Options R&S CMW-KE100 and R&S CMW-KE800 are required for internal fading.
For further reference:
●
chapter 4.2.1, "Test Setups" , on page 466
●
chapter 4.2.5, "External Fading" , on page 473
●
chapter 4.2.6, "Internal Fading" , on page 474
Remote command:
ROUTe:
​
CDMA:
​
SIGN<i>?
​
ROUTe:
​
CDMA:
​
SIGN<i>:
​
SCENario?
​
ROUTe:
​
CDMA:
​
SIGN<i>:
​
SCENario:
​
SCELl
​
ROUTe:
​
CDMA:
​
SIGN<i>:
​
SCENario:
​
HMODe
​
ROUTe:
​
CDMA:
​
SIGN<i>:
​
SCENario:
​
SCFading:
​
INTernal
​
ROUTe:
​
CDMA:
​
SIGN<i>:
​
SCENario:
​
SCFading[:
​
EXTernal]
​
GUI Reference
深圳德标仪器
135-1095-0799