R&S CMW-KG8 Series, User Manual, Page: 103 / 964

1xEV-DO Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
103 User Manual 1173.9511.02 ─ 11
Fig. 2-49: Security settings
Secret Key ...................................................................................................................103
Operator Variant Key .................................................................................................. 103
Authentication Management Field ...............................................................................103
Sequence Number ...................................................................................................... 103
Secret Key
The shared authentication key (32 hexadecimal digits).
Remote command:
CONFigure:
​
EVDO:
​
SIGN<i>:
​
NETWork:
​
SECurity:
​
SKEY
​
Operator Variant Key
The value
OPc
derived from the "Secret Key" and the operator dependent value OP
(32 hexadecimal digits).
Remote command:
CONFigure:
​
EVDO:
​
SIGN<i>:
​
NETWork:
​
SECurity:
​
OPC
​
Authentication Management Field
The AMF input parameter (4 hexadecimal digits) of the AKA' authentication algorithm
Remote command:
CONFigure:
​
EVDO:
​
SIGN<i>:
​
NETWork:
​
SECurity:
​
AUTHenticat
​
Sequence Number
The sequence number (12 hexadecimal digits) sent to the AT in the EAP-request /
AKA'-challenge message
Remote command:
CONFigure:
​
EVDO:
​
SIGN<i>:
​
NETWork:
​
SECurity:
​
SQN
​
2.4.9.6 Neighbor Cell Settings
This section defines neighbor cell information to be broadcast to the AT. LTE is the
only supported neighbor cell technology in the current release. You can define several
LTE neighbor cell entries.
The neighbor cell configuration enables the R&S CMW to send messages related to
neighbor cells to an AT, but the R&S CMW does not emulate the signal of neighbor
cells.
GUI Reference
深圳德标仪器
135-1095-0799