1xEV-DO Measurements
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
401
User Manual 1173.9511.02 ─ 11
Suffix:
<no>
.
1..200
Return values:
<Reliability>
Conventions and General Information
. In list mode, a zero relia-
bility indicator indicates that the results in all measured seg-
ments are valid. A non-zero value indicates that an error occur-
red in at least one of the measured segments.
<SegReliability>
0 | 3 | 4 | 8
The segment reliability indicates whether one of the following
exceptions occurred in this segment:
0:
No error
3:
Signal overflow
4:
Signal low
8:
Synchronization error
If a combination of exceptions occurs, the most severe error is
indicated.
<OBW>
Occupied bandwidth
Range:
0 to 16 MHz
Default unit: MHz
<LowerFreq>
Lower edge of the selected carrier's or carrier group's occupied
bandwidth.
For single-carrier configurations the lower and upper edges are
returned as frequency offsets w.r.t. the carrier's center fre-
quency. For multi-carrier configurations absolute frequency val-
ues are returned.
Range:
- 16 to 6000 MHz
Default unit: MHz
<UpperFreq>
Upper edge of the selected carrier's or carrier group's occupied
bandwidth.
For single-carrier configurations the lower and upper edges are
returned as frequency offsets w.r.t. the carrier's center fre-
quency. For multi-carrier configurations absolute frequency val-
ues are returned.
Range:
- 16 to 6000 MHz
Default unit: MHz
Example:
See
Performing Single-Shot Measurements
Usage:
Query only
Firmware/Software:
V2.0.20
Options:
R&S CMW-KM012
For additional information concerning syntax elements and returned values refer to
Conventions and General Information
.
Command Reference
深圳德标仪器
135-1095-0799
