R&S CMW-KG8 Series, User Manual, Page: 603 / 964

CDMA2000 Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
603 User Manual 1173.9511.02 ─ 11
Setting parameters:
<Action> CONNect | DISConnect | UNRegister | SMS | HANDoff
Transition between connection states.
Example: See Handoff
Usage: Event
Firmware/Software: V1.0.15.0
V1.0.15.23: SMS action added
Manual operation: See "Connection Control Hotkeys" on page 524
CALL:CDMA:SIGN<i>:REConfigure:STARt
Activates the settings for the first service option and radio configuration as selected via
the following commands:
CONFigure:
​
CDMA:
​
SIGN<i>:
​
REConfigure:
​
LAYer:
​
SOPTion:
​
FIRSt
​
CONFigure:
​
CDMA:
​
SIGN<i>:
​
REConfigure:
​
LAYer:
​
RCONfig
​
Example: See Set up a Connection
Usage: Event
Firmware/Software: V3.2.80
Manual operation: See "Reconfigure ... (Hotkey)" on page 525
FETCh:CDMA:SIGN<i>:SOPTion:STATe?
Returns the connection state of a CDMA2000 connection. Use
CALL:
​
CDMA:
​
SIGN<i>:
​
SOPTion:
​
ACTion
​
to initiate a transition between different connection
states. The state changes to
ON
as soon as the signaling generator is started
(
SOURce:
​
CDMA:
​
SIGN<i>:
​
STATe
​
ON). To make sure that a CDMA2000 signal is
actually available, query the state:
SOURce:CDMA:SIGN<i>:STATe:ALL?
must
return
ON, ADJ
.
Return values:
<State> OFF | ON | IDLE | REGistered | PAGing | ALERting |
CONNected
Connection state; for details refer to
Connection States .
Example: See Set up a Connection
Usage: Query only
Firmware/Software: V1.0.15.0
Manual operation: See "Mobile Station" on page 510
Command Reference
深圳德标仪器
135-1095-0799