R&S CMW-KG8 Series, User Manual

Page: 602 / 964

CDMA2000 Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
602 User Manual 1173.9511.02 ─ 11
SOURce:CDMA:SIGN<i>:STATe <Control>
Turns the signal generator on or off.
See also: "Generator Control" in the R&S CMW user manual, chapter "Remote Con-
trol"
Setting parameters:
<Control> ON | OFF
Switch generator
ON or OFF
*RST: OFF
Return values:
<GeneratorState> OFF | PENDing | ON
OFF: generator switched off
PEND: generator switched on but no signal available yet
ON: generator switched on, signal available
*RST: OFF
Example: See General Configuration
Firmware/Software: V1.0.15.0
Manual operation: See "Cell" on page 510
SOURce:CDMA:SIGN<i>:STATe:ALL?
Returns detailed information about the "CDMA2000 Signaling" generator state.
Return values:
<MainState> ON | OFF
ON: generator has been turned on
OFF: generator switched off
<SyncState> PENDing | ADJusted
PENDing: the generator has been turned on (off) but the signal
is not yet (still) available
ADJusted: the physical output signal corresponds to the main
generator state (signal off for main state OFF, signal on for main
state ON)
Example: See General Configuration
Usage: Query only
Firmware/Software: V1.0.15.0
Manual operation: See "Cell" on page 510
CALL:CDMA:SIGN<i>:SOPTion:ACTion <Action>
Initiates a transition between different connection states; to be queried via
FETCh:
​
CDMA:
​
SIGN<i>:
​
SOPTion:
​
STATe?
​
. For details refer to Connection States .
Command Reference
深圳德标仪器
135-1095-0799