1xEV-DO Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
100
User Manual 1173.9511.02 ─ 11
Sector ID [Bits 23 ... 0] ← ANSI-41
24-bit sector ID, entered as a 6-digit hexadecimal number.
Remote command:
Number P-Bits ← ANSI-41
Number of parity bits.
Remote command:
Overall ID [Bits 127 ... 0] ← ANSI-41
Calculated overall ID, depending on the SID, the "Sector ID", and the "Number P-Bits".
Remote command:
Manual > Sector ID [Bits 127 ... 0]
Overall ID for "Manual" format, an editable 32-digit hexadecimal number.
Remote command:
2.4.9.4
Access Probes
The parameters in the "Access Probes" section control the access channel transmis-
sion of the AT under test. The AT transmits access probes to begin session negotia-
tion, which may also occur at times other than the power on cycle (for example, after a
session close). It also transmits access probes to initiate a call. Access probe transmis-
sion is described in standard 3GPP2 C.S0003-E; the numerical parameters in the
Access Parameters Message in standard 3GPP2 C.S0005-E.
Some of the "Access Probes" parameters require the Enhanced Access Channel Pro-
tocol. This protocol is used if network revision A or B is active.
Fig. 2-48: Access probes
For background information refer to
chapter 2.2.10, "Access Probes"
GUI Reference
深圳德标仪器
135-1095-0799
