1xEV-DO Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
46
User Manual 1173.9511.02 ─ 11
7. In section "System" > "RF Output (TX)" / "RF Input (RX)" select a bidirectional RF
connector for input and output. In this example RF 1 COM is used.
If necessary, also adjust the "External Attenuation" settings.
8. Close the configuration dialog.
9. To turn on the forward signal press the "ON | OFF" key and wait until the "1xEV-
DO Signaling" softkey indicates the "ON" state and the hour glass symbol has dis-
appeared.
10. Switch on the AT.
The activity of the negotiation is displayed as state "Session negotiation". Once the
negotiation is finished, the state display changes to "Session Open", indicating that
the R&S
CMW and the AT are now ready for a connection.
11. Press the "Connect" hotkey to set up a connection.
Note the connection states displayed in the main view and wait until the AT state
indicates "Connected".
After the AT has connected, the main view provides session details and AT infor-
mation.
Application Sheets
深圳德标仪器
135-1095-0799