1xEV-DO Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
17
User Manual 1173.9511.02 ─ 11
For a setup with only one downlink path you need only two of the four I/Q data connec-
tions.
The RF connections between R&S
CMW and DUT must be established in the same
way as without external fading.
2.2.1.4
Test Setup for Internal Fading Scenarios
If internal fading shall be used, the test setup is the same as for the corresponding sce-
nario without fading.
2.2.2 Initiating Signaling Tests
The signal generator of the "1xEV-DO Signaling" application is controlled in the same
way as any other real-time or signaling generator, see
chapter 2.4.2, "Signaling Con-
on page 59 . The 1xEV-DO forward signal is turned on as long as the "1xEV-
DO Signaling" softkey indicates the "ON" state (after switching on, wait until the hour
General Description
深圳德标仪器
135-1095-0799