CDMA2000 Measurements
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
731
User Manual 1173.9511.02 ─ 11
5.2.7.2
Multi Evaluation Detailed Views: EVM, Magnitude Error, Phase Error
This section applies to the following detailed views:
●
Error vector magnitude
●
Magnitude error
●
Phase error
Each of the detailed views shows a diagram and a statistical overview of results, both
related to the same time interval of the signal.
Fig. 5-9: CDMA2000 multi evaluation: magnitude error
The diagrams show the respective measurement error as a function of time. The dia-
grams cover a time interval of 500 μs and contain 1 sample per chip. If the limits are
set, they are indicated by the red dashed lines.
The description of statistical measurement results is covered in
Evaluation Detailed Views: Power, Modulation Quality"
For additional information refer to
5.2.7.3
Multi Evaluation Detailed Views: Code Domain
These views are only applicable to signals with H-PSK modulation.
The code domain view presents the CDP and the CDE results displayed in "Diagram
View" as bar graphs and in a "Table View" as scalar values. Separate values are avail-
General Description
深圳德标仪器
135-1095-0799
