R&S CMW-KG8 Series, User Manual, Page: 533 / 964

CDMA2000 Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
533 User Manual 1173.9511.02 ─ 11
Noise Bandwidth
Total level of the AWGN interferer within the channel bandwidth (the spectral density
covering the receive band and 5 MHz outside the band).
The properties of the AWGN interferer comply with the requirements of 3GPP2
C.S0011, section 6.4.4 (e.g. minimum bandwidth 1.8 MHz, flatness less than ±1 dB,
frequency resolution 1 kHz, output range -20 dBm to -95 dBm).
Remote command:
CONFigure:
​
CDMA:
​
SIGN<i>:
​
FADing:
​
AWGN:
​
BWIDth:
​
NOISe?
​
Effective Signal Bandwidth
Displays the efective bandwidth of the forward link.
Signal/Noise Ratio
Displays the signal to noise ratio resulting from the configured AWGN level and the
base level of the forward signal generator.
Remote command:
CONFigure:
​
CDMA:
​
SIGN<i>:
​
FADing:
​
AWGN:
​
SNRatio
​
4.3.7 System Settings
The system settings are structured as follows.
Fig. 4-34: System overview
● Signal Routing .......................................................................................................533
● RF Frequency ....................................................................................................... 535
● RF Power Settings ................................................................................................ 536
● Physical Layer .......................................................................................................538
● Reverse Power Control .........................................................................................542
● Time ...................................................................................................................... 544
4.3.7.1 Signal Routing
The parameters in this section provide general signal settings and configure one input
path and one output path.
See also: "RF Path Settings (Generators)" in the R&S CMW user manual, chapter
"System Overview"
See also: "Connection Control (Measurements)" in the R&S CMW user manual, chap-
ter "System Overview"
GUI Reference
深圳德标仪器
135-1095-0799