1xEV-DO Measurements
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
406
User Manual 1173.9511.02 ─ 11
<14_ATPowWide>
Access terminal power, measured with a filter bandwidth of 8
MHz.
Range:
-100 dBm to 50 dBm
Default unit: dBm
<15_WavQuality>
Waveform quality
Range:
0 to 1
<16_WavQualMaxP> Waveform quality at maximum power.
Range:
0 to 1
<17_WavQualMinP> Waveform quality at minimum power.
Range:
0 to 1
<18_OutOfTolCount> Out of tolerance result, i.e. percentage of measurement inter-
vals of the statistic count (see
limits, see
.
Range:
0 % to 100 %
Default unit: %
<19_CurStatCount>} Number of evaluated valid slots in this segment.
Range:
0 to 1000
Example:
See
Performing Single-Shot Measurements
Usage:
Query only
Firmware/Software:
V2.0.20
Options:
R&S CMW-KM012
For additional information concerning syntax elements and returned values refer to
Conventions and General Information
.
CALCulate:EVDO:MEAS<i>:MEValuation:LIST:CP:AVERage?
CALCulate:EVDO:MEAS<i>:MEValuation:LIST:CP:CURRent?
CALCulate:EVDO:MEAS<i>:MEValuation:LIST:CP:MINimum?
CALCulate:EVDO:MEAS<i>:MEValuation:LIST:CP:MAXimum?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:CP:AVERage?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:CP:CURRent?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:CP:MINimum?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:CP:MAXimum?
Returns the Channel Power (CP) value results in list mode. To define the statistical
length for
AVERage
,
MAXimum
,
MINimum
calculation and enable the calculation of the
results use the command
.
The values listed below in curly brackets {} are returned for each active segment:
{...}
seg 1
, {...}
seg 2
, ..., {...}
seg n
. The number of active segments n is determined by
.
Command Reference
深圳德标仪器
135-1095-0799
