R&S CMW-KG8 Series, User Manual, Page: 563 / 964

CDMA2000 Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
563 User Manual 1173.9511.02 ─ 11
This is an autonomous registration; see Autonomous Registration (Home / Foreign
SID / Foreign NID)
Remote command:
CONFigure:
​
CDMA:
​
SIGN<i>:
​
NETWork:
​
REGistration:
​
PDOWn
​
Parameter-change Registration
If parameter-change registration is enabled, the mobile station registers when certain
of its stored parameters change or when it enters a new system.
Remote command:
CONFigure:
​
CDMA:
​
SIGN<i>:
​
NETWork:
​
REGistration:
​
PARameter
​
4.3.9.8 Access Probes
This section defines the access probe properties. An access probe consists of a pre-
amble and a message.
Fig. 4-55: Access probes setting
With the basic signaling option R&S CMW-KS800 only "Sequences / Attempt / RSP"
(MAX_RSP_SEQ) can be modified. The other parameters require the advanced signal-
ing option R&S CMW-KS810.
Access Probes ............................................................................................................ 563
Nominal Offset ............................................................................................................ 564
Initial Offset ................................................................................................................. 564
Probe Increment ..........................................................................................................564
Probes per sequence .................................................................................................. 564
Sequences / Attempt / RSP ........................................................................................ 564
Sequences / Attempt / REQ ........................................................................................ 564
Access Probes
Defines if the transmitted access probes from the MS will be ignored or acknowledged
by the R&S
CMW.
●
Acknowledge : The R&S CMW acknowledges incoming access probes from the
MS.
●
Ignore : The R&S CMW does not acknowledge incoming access probes from the
MS.
Remote command:
CONFigure:
​
CDMA:
​
SIGN<i>:
​
NETWork:
​
APRobes:
​
MODE
​
GUI Reference
深圳德标仪器
135-1095-0799