CDMA2000 Generator
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
938
User Manual 1173.9511.02 ─ 11
PN Offset
Sets the offset of the PN sequence. Changing the PN offset changes the timing of the
pilot channel, the timing and contents of the sync channel message, and the long code
mask of the paging channel.
Remote command:
Radio Configuration
Sets the radio configuration which is used for the Forward Fundamental Channel (F-
FCH).
See also:
Remote command:
System ID Number
Sets the system identification number which is communicated to the mobile station dur-
ing test phase.
Remote command:
Protocol Revision
Sets the preferred version of the protocol to use.
Remote command:
Min Protocol Revision
Defines the minimum protocol revision (min PRev) which the mobile station has to sup-
port in order that the base station allows a connection setup:
PRev (of the MS) > min PRrev (defined by the BS)
Remote command:
Network ID Number
Sets the 16-bit network identification number which is communicated to the mobile sta-
tion under test phase.
Remote command:
ESN
Sets the Electronic Serial Number (ESN) of the mobile station (MS). It is 32-bit number
which is entered in 8-digit hex string format. The ESN would be used to generate the
public long code mask of the MS if "Zero Long Code Mask" could be disabled - but this
is currently not supported
Remote command:
GUI Reference
深圳德标仪器
135-1095-0799