R&S CMW-KG8 Series, User Manual

Page: 63 / 964

1xEV-DO Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
63 User Manual 1173.9511.02 ─ 11
For further reference:
●
chapter 2.2.1, "Test Setups" , on page 14
●
chapter 2.2.4, "External Fading" , on page 21
●
chapter 2.2.5, "Internal Fading" , on page 22
Remote command:
ROUTe:
​
EVDO:
​
SIGN<i>?
​
ROUTe:
​
EVDO:
​
SIGN<i>:
​
SCENario?
​
ROUTe:
​
EVDO:
​
SIGN<i>:
​
SCENario:
​
SCELl
​
ROUTe:
​
EVDO:
​
SIGN<i>:
​
SCENario:
​
HMODe
​
ROUTe:
​
EVDO:
​
SIGN<i>:
​
SCENario:
​
SCFading:
​
INTernal
​
ROUTe:
​
EVDO:
​
SIGN<i>:
​
SCENario:
​
SCFading[:
​
EXTernal]
​
2.4.5 I/Q Settings
The parameters in this section configure the I/Q output and input paths for scenarios
with external fading.
In such scenarios, a connected R&S AMU200A superimposes fading on the baseband
forward link signal.
For a dual carrier scenario with external fading, all parameters described below are
available per carrier.
For general prerequisites, required options and background information see chap-
ter 2.2.4, "External Fading" , on page 21.
Fig. 2-19: I/Q settings (standard cell fading: external)
Connector (Out / In) ...................................................................................................... 64
Sample Rate (Out / In) .................................................................................................. 64
Baseband PEP (Out / In) ...............................................................................................64
Crest Factor (Out) ......................................................................................................... 64
Baseband Level (In) ...................................................................................................... 64
GUI Reference
深圳德标仪器
135-1095-0799