1xEV-DO Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
153
User Manual 1173.9511.02 ─ 11
<TXConnector>
RF1C | RF1O | RF2C | RF3C | RF3O | RF4C
RF 1 COM to RF 4 COM and RF 1/3 OUT front panel connec-
tors
<TXConverter>
TX1 | TX2 | TX3 | TX4
TX module for the output path
<IQ1Connector>
IQ2O | IQ4O | IQ6O | IQ8O
DIG IQ OUT connector for the first output path, only returned for
scenarios with external fading
Usage:
Query only
Firmware/Software:
V2.0.10
V3.2.10: scenario "HMOD" added
V3.2.80: added <IQ1Connector> and scenario SCFading
Manual operation:
See
ROUTe:EVDO:SIGN<i>:SCENario?
Returns the active scenario.
Return values:
<Scenario>
SCELl | HMODe | SCFading
SCEL
: Standard Cell
HMOD
: Hybrid Mode
SCFading
: Standard Cell Fading
<Fader>
EXTernal | INTernal
Only returned for fading scenario (SCF)
Indicates whether internal or external fading is active.
Usage:
Query only
Firmware/Software:
V2.0.10
V3.2.10: parameter "HMOD" added
V3.2.80: added <Fader> and scenario SCFading
Manual operation:
See
ROUTe:EVDO:SIGN<i>:SCENario:SCELl
<RXConnector>, <RXConverter>,
<TXConnector>, <TXConverter>
Activates the standalone scenario and selects the RF input (RX) and output (TX) path,
i.e. RF connectors and RX/TX modules.
Depending on the installed hardware and the active sub-instrument or instance <i>
only a subset of the described parameter values is allowed. The *RST values and the
mapping of virtual connector names to physical connectors also depend on the active
sub-instrument or instance <i>.
All instruments are equipped with the RF 1 and RF 2 connectors and one RX and TX
module. Additional RF connectors and RX/TX modules are optional.
Command Reference
深圳德标仪器
135-1095-0799
