R&S CMW-KG8 Series, User Manual

Page: 14 / 964

1xEV-DO Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
14 User Manual 1173.9511.02 ─ 11
– Description of External Fading
– Scenario
– I/Q Settings
– Test Setup for External Fading Scenarios
●
HRPD and eHRPD, see Preferred Packet Mode and Negotiated Mode
●
User defined power control bit pattern, see Segments
●
View selection in remote control, see
CONFigure:
​
EVDO:
​
SIGN<i>:
​
DISPlay
​
●
Leap seconds don't require advanced signaling anymore, see Leap Seconds
●
Range of absolute carrier power level extended to 90 dBm, see
CONFigure:
​
EVDO:
​
SIGN<i>:
​
CARRier:
​
LEVel:
​
ABSolute
​
Software Version
To check your R&S CMW software version, open the "Setup" dialog and click "SW/HW
Equipment". The initial software version for each remote control command is quoted in
the reference description.
2.2 General Description
The following sections describe how to use the R&S CMW for "1xEV-DO signaling"
tests and provide useful background information.
● Test Setups .............................................................................................................14
● Initiating Signaling Tests ......................................................................................... 17
● End to End Packet Data Connections .....................................................................19
● External Fading .......................................................................................................21
● Internal Fading ........................................................................................................ 22
● Connection States ...................................................................................................23
● Handoff ....................................................................................................................24
● Inter-RAT Handover ................................................................................................25
● Test Application Protocols .......................................................................................26
● Access Probes ........................................................................................................ 26
● Band Classes ..........................................................................................................27
● Trigger Signals ........................................................................................................29
● Hybrid Mode ............................................................................................................30
● RX Measurements .................................................................................................. 33
2.2.1 Test Setups
The following sections provide an overview of typical test setups for the individual sce-
narios.
General Description
深圳德标仪器
135-1095-0799