CDMA2000 Measurements
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
856
User Manual 1173.9511.02 ─ 11
The values listed below in curly brackets {} are returned for each active segment:
{...}
seg 1
, {...}
seg 2
, ..., {...}
seg n
. The number of active segments n is determined by
.
The number to the left of each result parameter is provided for easy identification of the
parameter position within the result array.
Return values:
<1_Reliability>
. In list mode, a zero reliability indicator indi-
cates that the results in all measured segments are valid. A non-
zero value indicates that an error occurred in at least one of the
measured segments.
{<2_SegReliability>
0 | 3 | 4 | 8
The segment reliability indicates whether one of the following
exceptions occurred in this segment:
0:
No error
3:
Signal overflow
4:
Signal low
8:
Synchronization error
If a combination of exceptions occurs, the most severe error is
indicated.
<3_RPICH>
<4_RDCCH>
<5_RCCCH>
<6_REACH>
<7_RFCH>
<8_RSCH0w02E04>
<9_RSCH0w01E02>
<10_RSCH1w06E08>
<11_RSCH1w02E04>}
Phase offset for the indicated channels in the in-phase signal
path (I-signal).
Range: –180 deg to +180 deg
Default unit: deg
Example:
See
Performing Single-Shot Measurements
Usage:
Query only
Firmware/Software:
V1.0.15.20,
V1.0.15.23:
FETCh:CDMA:MEAS<i>:MEValuation:LIST:CPO:MINimum
V2.0.10: added
CALCulate:...
commands,
removed
...:CPO:MINimum
Options:
R&S CMW-KM012
For additional information concerning syntax elements and returned values refer to
Conventions and General Information
.
FETCh:CDMA:MEAS<i>:MEValuation:LIST:CPO:STATe?
Return the states of the channels for Channel Phase Offset (CPO) measurements.
Command Reference
深圳德标仪器
135-1095-0799
